Documentation › Machines › Cutting plotters

Graphtec FC7000

Connect the Graphtec FC7000 and send it the cut in HP-GL.

#What the RIP does

It sends the cut in HP-GL, at a 0.025 mm step.

#Connect

Network (fixed IP) with a Network (TCP) connection, or serial / USB-serial.

#On the Graphtec

HP-GL commands (Menu > Interface > Command); ARMS registration is set on the machine's panel.

#In the RIP

Step 0.025 mm; cut settings; Offset X / Y.

#Check

nc -vz <ip> <port> from the server.

#Common trouble

• Nothing cuts: the interface is not set to HP-GL.
• Output failed, machine unreachable: check the address, the port and the cable.

See: cutting, machines.

Found a mistake or something missing? Suggest a fix or write to contact@e-ko.rip.